Home > Epson Stylus > Epson Stylus C62 - Any Problems ?

Epson Stylus C62 - Any Problems ?

Return to the index Q: Is there any difference in printing performance between the parallel and USB interfaces? Make sure you've loaded letter-size paper in your printer, then click 'Print a Test Page' to check that your printer is set up correctly. 9. Return to the index Q: Can I use the cleaning sheets that are included with any special media I purchase? Ink Replacement Button Press the Ink Replacement button to start the cartridge replacement procedure when the ink light is on or blinking. check over here

I need more help! Return to the index Q: What steps need to be taken when transporting the Printer? Macintosh OS 8.5.1 to 9.x: Open your application's File menu and choose Page Setup or Print. A: When the printer's red Error light flashes, an ink cartridge is low on ink.

i am flor. To check your ink supply, do one of the following: Windows: Double-click the printer icon on your taskbar (in the lower right corner of your screen). Where it says SEPARATOR PAGE, change to NONE. 4.

  • Wait until the printer stops printing and press the power button down for 2 seconds to power off the printer.
  • Q: I am getting the message "Sorry SC62 cannot be used" when I try to select the "SC62" icon in the Chooser.
  • A: Macintosh Requirements A Power Macintosh G3, G4, iMac or eMac with a built-in USB port Mac OS 8.5.1 through OS X 10.1 or higher. (Mac OS
  • How do it clean the waste ink tank on Epson Stylus CX 8400 Epson Stylus RX620 giving me two different out of ink errors How do i get the old ink
  • Return to the index Q: How can I obtain the latest printer drivers?

Optionally, double-click the Film Factory Installer icon and follow the on-screen instructions to install the software. 11. It may be harmful to your printer if you turn the printer off using an external switch. After your Macintosh restarts, register your printer with EPSON as instructed. 6. Can anyone help please.

A: If you move your printer some distance, you need to prepare it for transportation in its original box or one of a similar size. Q: What steps need to be taken when transporting the Printer? It flashes when the printer is receiving a print job, charging ink, or cleaning the print head. https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&infoType=FAQs&oid=14418&prodoid=22966681 A: You can run a printer operation check to determine whether the problem comes from the printer itself or some other source.

Then click the Uninstall button at the bottom and follow the on-screen instructions. 4. If you're still experiencing a problem, try replacing the ink cartridges with genuine EPSON ink cartridges.

Return to the index Q: Why is my printer printing colored pages in black and Continue with step 5. 5. Before you print, always check your Media Type setting.

Q: Nothing prints. Unwrap the new ink cartridge, being careful not to touch the green chip on the back of the cartridge, then remove ONLY the yellow tape seal from the top of the Turn on your Macintosh. Get the answer georgeMar 2, 2005, 6:22 AM Archived from groups: comp.periphs.printers (More info?)OK, I know that answer to that now :-) they are going to send me a CD to

Return to the index Q: What is RPM technology? http://revolutionpc.net/epson-stylus/epson-stylus-rx620-problems.html Also, make sure the printer is no longer printing. A: Follow these steps: 1. Double-click the Ports (COM & LPT) icon and then the LPT1 icon.

All Rights Reserved Tom's Hardware Guide ™ Ad choices ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: Connection to Insure that the needed system resources are available. Return to the index Printer Driver Questions Q: How can I obtain the latest printer drivers? http://revolutionpc.net/epson-stylus/epson-stylus-c82-printing-problems.html The Error light also flashes when there is a paper jam so make sure to check your paper before changing the ink cartridge.

Please try again later. IEEE 1284 compliant parallel cable (not included). Your printer software automatically converts RGB files to your printer's 4-color CMYK format.

That's why the Media Type setting is so important.

Does anyone know what I am doing wrong? I have used PSP7 and MS >Paint with both programs giving the same results. Generated Tue, 07 Feb 2017 22:47:06 GMT by s_wx1221 (squid/3.5.23) To avoid damage, always leave the ink cartridges installed when transporting the printer.

A: EPSON does not recommend refilling or using 3rd party ink cartridges. You may need to use a magnifying glass or loupe. Type the characters you see in this image: Try different image Continue shopping Conditions of Use Privacy Policy © 1996-2014, Amazon.com, Inc. have a peek at these guys Click OK to save the settings. 8.

Charging takes about 1.5 minutes and is complete when the power light stops flashing. Lower the new cartridge down into the holder making sure the tabs rest on the hooks in back. Double-click EPSON on your desktop, if necessary, then double-click EPSON in the window that opens. 3. The print speed is dependent upon the amount of RAM in your system, the type and speed of your computer's processor, and the amount of free hard drive space and degree

Click Install Manual and Printer Movies and follow the on-screen directions to place a shortcut to the EPSON Printer Information Center on your desktop. 8. Then click Print nozzle check pattern (Windows) or Confirmation (Macintosh) and follow the on-screen directions to print a nozzle check. 5. This setting is not available for all media types. Also, what type of color matching system (CMS) are you using when printing your image?

A: Power the printer on and press the Maintenance button to see if paper will load. If it does not stop, the printer may need service and you should contact Epson technical support for assistance. Q: Why can't I print web pages the way they are displayed on my monitor? Load the envelopes short edge first against the right edge of the sheet feeder.

If you have background printing enabled, you may want to try disabling it. Click Finish when you see the Completing Found New Hardware Wizard screen. 5. Caution: Using an improperly shielded USB cable - especially more than 6.5 feet (2 meters) long - may cause the printer to malfunction. However, if you change the parallel port setting to ECP or Enhanced using your computer's BIOS setup program, you may be able to use DMA transfer.

Q: How do I remove the printer driver from Windows? You see the Main menu of your printer settings dialog box. 4. Click the lock icon, enter your administrator password, and click OK. A: First disconnect the printer from the computer and then follow these steps to remove the driver software. 1.

Too many active USB devices may slow the printer.

© Copyright 2017 revolutionpc.net. All rights reserved.